Search for your product name or keyword, or use the product categories below
SP1848-27145 4.8V Seebeck Thermoelectric Power Generator TEG Peltier Module
Where to Buy the SP1848-27145 TEG Peltier Module
SP1848-27145 Overview
A Thermoelectric Generator (TEG) module is a semiconductor-based Peltier thermoelectric device that functions as a small electric generator. By applying heat on one side and cold on the other side, the device will generate a voltage whose amplitude depends upon the temperature differential between the two sides of the device.
See the table below for specific voltage and current output.
| Temperature Differential (°C) | 20 | 40 | 60 | 80 | 100 |
| Open Circuit Output Voltage (V) | 0.97 | 1.8 | 2.4 | 3.6 | 4.8 |
| Short Circuit Output Current (mA) | 225 | 368 | 469 | 558 | 669 |
SP1848-27145 Specifications
- Model: SP1848-27145
- Size: 40mm x 40mm x 4mm
- Operating Temperature: -30C to +120C
DO NOT EXCEED THE MAXIMUM OPERATING TEMPERATURE - Fitted with 12-inch (approx.) insulated leads
- The side with words is the side to be cooled, and the other side (without lettering) is the heated side.
To achieve maximum voltage and current output, the cold side of the device must be attached to a heatsink, cold plate or chiller in order to remove the heat from it. Without adequate cooling, the device will heat up quickly, output power will decrease, and the device will fail if allowed to overheat. As with all TEGs and TECs, this device must be mounted to a heatsink before applying heat to it. Failure to do so may result in device failure.
SP1848-27145 References
TEC/TEG Installation Instructions: https://www.electracool.com/install.htm
Copyright © 2019-2024 Envistia Mall
EM-ECOMP-0076
SP1848 SP1848-27145